Conditioned air, built up section by section
An air handling unit (AHU) takes in fresh air, return air or a mix, then filters it, cools and dehumidifies it, and supplies it through ductwork to the space. It is where temperature, humidity, filtration and fresh-air quantity are controlled together. In a humid climate, the AHU’s cooling coil is also one of the main tools for removing moisture.
The Nexus range includes modular AHUs built up from sections to suit the duty. Capacities are selected to your load. Ask for a datasheet.
How it works
Air enters through a mixing section, where dampers set the balance of fresh and return air. It passes through a pre-filter and a fine filter, then a cooling coil supplied with chilled water from a chiller or with refrigerant from a direct-expansion system. The coil cools the air below its dew point so moisture condenses and drains from a drip tray. Where humidity control needs it, a reheat section brings the air back to a comfortable supply temperature. The fan supplies the air through ductwork, with terminal HEPA filters in clean areas.
Where it fits
- Production areas where temperature and humidity affect product or process.
- Clean and positive-pressure areas.
- Large halls needing fresh-air supply.
- Offices, laboratories and control rooms.
Selection notes
- Fresh air is the big load. In Cambodia, outside air is hot and humid much of the year. Treating it properly is usually the largest share of the AHU’s cooling and dehumidification duty.
- Size the coil for moisture, not just heat. A coil selected only for temperature may leave humidity high at part load. Where humidity matters, we size for both, and add dedicated dehumidification where needed.
- Filtration. Filter stages are chosen for the space: pre-filters and pocket filters for most areas, HEPA for clean areas.
- Condensation and hygiene. Insulated casings, drained trays that do not hold water, and access for cleaning keep the unit hygienic.
- Maintainability. Access doors and space to withdraw coils and filters matter over the unit’s life.
What Nexus provides
Load and air-quantity calculation, AHU configuration, ductwork and controls design, installation and commissioning with air balancing, and planned maintenance: filter changes, coil cleaning, drain checks and fan service.