PSA nitrogen generators
On-site PSA nitrogen generators with selectable purity, replacing cylinders and liquid deliveries for everyday nitrogen use.
Products · Nexus
A nitrogen generator in Cambodia lets a plant produce its own nitrogen from compressed air instead of buying cylinders or liquid deliveries. Nexus Turnkey supplies PSA and membrane generators from the Nexus range. PSA suits higher purity; membrane suits compact, lower-purity duty. Purity and flow are selected to your process, and the feed-air system is designed with the generator, because dirty or wet feed air is the most common reason a generator underperforms. We install, commission and service the complete system.
How to choose
| Question | PSA generator | Membrane generator |
|---|---|---|
| Purity you need | Suits higher purity requirements | Suits lower purity requirements |
| Space and simplicity | Two adsorption vessels, valves and a controller | Compact module with few moving parts |
| Feed air | Clean, dry, oil-free feed protects the carbon molecular sieve | Clean, oil-free feed at controlled temperature protects the fibres |
| Demand pattern | Buffer tank smooths intermittent draw | Steady draw suits it well |
| Typical uses | Food packaging, electronics, pharma blanketing, laser cutting | Tyre inflation, fire prevention, some packaging and blanketing |
Families
On-site PSA nitrogen generators with selectable purity, replacing cylinders and liquid deliveries for everyday nitrogen use.
Compact membrane nitrogen generators with few moving parts, for steady, lower-purity nitrogen duties.
Ranges are indicative. Confirm against the current manufacturer datasheet.
Air is about 78 % nitrogen by volume. A nitrogen generator separates it from the oxygen and other gases in compressed air, on site and on demand. For plants that use nitrogen every day, that can replace cylinder handling, delivery schedules and the risk of running out mid-shift. Whether it also lowers cost depends on your consumption and purity, so we work it out on your numbers. Our article on nitrogen generators versus cylinders explains the comparison.
Nexus Turnkey supplies two generator types from the Nexus range:
Three numbers decide the system: the purity your process needs, the flow at that purity, and the delivery pressure. The demand pattern matters too. Intermittent draws, such as a packaging line that stops and starts, are smoothed with a nitrogen buffer tank so the generator runs steadily.
Over-specifying purity is the most common sizing mistake. Every step up in purity takes more compressed air per cubic metre of nitrogen, so the compressor and generator get bigger. We confirm what the process and your customers require before we size. Capacities are selected to your load. Ask for a datasheet.
A generator is only as good as the compressed air it receives. Oil aerosols and liquid water damage carbon molecular sieve and membrane fibres, and the damage is gradual. Purity drifts down, flow falls, and the cause is not obvious until the media has to be replaced. So the feed-air system is designed with the generator: a compressor with enough spare capacity, a dryer, coalescing and carbon filtration, and drains that work.
In Cambodian plants the feed side has to cope with high humidity and high room temperatures. We correct dryer and filter capacities for site conditions and check the feed temperature, because membrane performance in particular depends on it. See our air treatment range for the equipment involved.
We size the generator, buffer tank and feed-air treatment as one system, install and commission it, and verify purity and flow at handover with a calibrated analyser. After that, generators go into the same maintenance plan as the compressors that feed them: elements, drains, valve inspection and analyser checks. One team answers for the air and the nitrogen.
FAQ
It depends on how much nitrogen you use, at what purity, and what you pay for cylinders or liquid today, including rental, deliveries and handling. We compare the two on your numbers: generator power and compressed air cost against your current supply cost. Our article on nitrogen generators versus cylinders sets out the method.
Your process sets it. Packaging, blanketing, inerting and laser cutting each have different requirements, and your product specification or customer may define it. Specifying higher purity than you need costs compressed air, so we confirm the requirement before sizing.
Often, if it has spare capacity and the air is treated properly. A generator needs clean, dry, oil-free feed air. We check spare capacity, pressure and air quality, and add dedicated filtration or a dryer where needed.
Mostly the feed-air side: filter elements, drains and the dryer. PSA generators also have valves that cycle constantly and need periodic inspection. We include generators in the same maintenance plan as the compressors that feed them.
Capacities are selected to your load. Ask for a datasheet for the duty you need.
Next step
Send your monthly cylinder or liquid usage, the purity you specify and where it is used. We will size a generator and the feed air around it.