Phnom Penh, serving Cambodia and the region

Industry

Dry stores, sound cartons and goods that leave as they arrived

Warehouse humidity control keeps stored goods, packaging and labels in the condition they arrived in through Cambodia's humid seasons. Nexus Turnkey surveys the building, seals the worst moisture paths, then sizes industrial dehumidifiers and ventilation to hold a target relative humidity. We add cooling where products need a temperature limit, ventilation for battery-charging areas, and sensors that log conditions for your customers. The target comes from your products and contracts, not a generic number.

Tall pallet racking along a warehouse aisle
Factory cross-section highlighting the air services used in Warehousing & logistics: Dehumidification, HVAC & chillers, Monitoring (AirSight), Compressed air. PRODUCTION HALLN₂+
Fig. · Factory cross-section, air services

Warehousing & logistics

Warehouse humidity control

A warehouse in a humid climate fights moisture from outside air, open doors, wet floors and the goods themselves. The lens shows dehumidifiers holding a target humidity, cooling and ventilation where products or people need it, sensors logging conditions, and the modest compressed air a loading dock or workshop uses.

Air services in focus: Dehumidification, HVAC & chillers, Monitoring (AirSight), Compressed air.

Explore warehousing & logistics

The challenge

A closed warehouse in a hot, humid climate collects moisture. Humid outside air enters through dock doors and gaps. Goods arrive damp, floors are washed and cool surfaces condense. Cartons lose strength and collapse in stacks. Labels lift, metal parts corrode, and textiles, food ingredients and paper take on moisture and odour. Mould can appear within a season. Large stores also run hot under the roof, and battery-charging areas for forklifts need ventilation.

The air services a warehouse needs

First, a survey and sealing plan. We identify where moisture enters, such as dock doors, roof and wall gaps and drainage, and fix what can be fixed. Strip curtains, fast doors and door discipline often matter as much as the machine.

Next, dehumidification. Industrial dehumidifiers are sized to the volume, infiltration and moisture load to hold a target relative humidity. Desiccant-rotor units are used for cool or low-humidity stores. See humidity control and industrial dehumidifiers for garment factories and warehouses.

Cooling and ventilation come from HVAC and chillers where products have a temperature limit. Battery-charging areas get ventilation.

Monitoring logs temperature, humidity and alarms to one screen. See SCADA and monitoring.

Docks and workshops need only modest compressed air, from a small, properly treated system.

What we check first

Most humid stores have a clear cause that is visible once you measure. Our survey covers the following.

  • A week of logging. Temperature and humidity inside and out, at several heights, show when and where moisture rises.
  • Door use. How long dock doors stand open, and whether strip curtains or fast doors are in place, often explains the readings.
  • Ventilation timing. Fans that draw in humid night air can add moisture rather than remove it. Controls should run ventilation when outdoor conditions help.
  • Product sensitivity. A list of what is stored, with any manufacturer or customer limits, sets the target and tells us which zones need the tightest control.

The design then targets the zones and hours that matter, instead of drying the whole building to the strictest limit.

Standards that apply

Typical scope

PackageWhat it usually includes
SurveyMoisture sources, door use, roof and wall gaps, loads
DehumidificationSized units, ducting, drainage, controls
ClimateCooling, ventilation, battery-area extraction
MonitoringTemperature and humidity logging with alarms

Read the industrial dehumidification guide, or ask design and engineering to size a store.

Scope

Relevant standards

Standards that commonly shape this industry's air
StandardWhy it matters here
Good storage and distribution practice (WHO GSDP, GDP)Context for pharmaceutical and healthcare warehouses: storage conditions should be controlled, mapped and monitored. Your quality system decides what applies.
ISO 16890Classifies supply-air filters for ventilated and conditioned stores.
We design to the standard your process requires. Nexus describes these standards; it does not claim certification against them.

FAQ

Questions engineers ask us

What relative humidity should a warehouse hold?

It depends on the goods. Cartons, textiles, paper, food ingredients and electronics each have their own sensitivity, and some customers state a limit in their contracts. We agree the target with you, then design to hold it through the wettest months.

Why not just ventilate with outside air?

In humid weather, outside air brings moisture in. Ventilation helps with heat and fumes, but it cannot lower humidity below outdoor levels. Dehumidification in a reasonably sealed building is what controls moisture.

Can sensors prove storage conditions to our customers?

Yes. Logged temperature and humidity readings with alarms give your customers and auditors a record. For pharmaceutical storage, mapping and calibrated sensors are usually expected.

Next step

Keep your stores at a humidity you can prove

Tell us what you store and how the building is used. We will size dehumidification and monitoring to hold your target.

Start typing to search