The cost of the wrong part
A compressor that stops for want of a filter costs more in lost production than the filter ever will. A part that nearly fits is worse. A separator element from the wrong revision, a lubricant that does not match the specification, or a filter with the wrong bypass setting can shorten the life of an airend or let oil into your air lines. It can also compromise the manufacturer’s warranty.
Getting the right part, first time, starts with identifying the machine correctly.
Start with the model and serial number
The form on this page asks for your machine’s model and serial number. That is deliberate. Manufacturers revise their machines over time, and two units with the same model name can need different kits, filters or separators. The serial number lets us find the exact part list for your machine.
What helps us quote quickly
- Brand and model of the machine
- Serial number, from the nameplate
- Running hours, if you know them
- The part you need, or a description of the problem
- A photo of the nameplate or the old part
- How urgent it is
What we supply
Compressor parts and consumables. As an authorised distributor of Ingersoll Rand and Sollant, we supply genuine service kits, air filters, oil filters, separator elements, lubricants, drains, sensors and controllers for their machines.
Air treatment parts. Dryer parts, compressed air filter elements (particulate, coalescing and activated carbon), zero-loss drains and oil-water separator media.
Filters and media. Pre-filters, pocket filters, panel filters, HEPA filters and media for AHUs, spray booths and dust collectors, from the AirMax range. See filters and media.
HVAC and chiller spares. Parts for chillers, AHUs, cooling towers and ventilation equipment. See HVAC and chillers.
The full parts catalogue is on our spare parts page.
Consumables matter more than they look
The parts replaced most often are the ones that most affect performance. An intake filter that is wrong for dusty conditions lets dirt into the airend. A separator element of the wrong grade sends more oil downstream, which loads your filters and can reach your product. A lubricant outside the manufacturer’s specification can shorten the life of bearings and seals and affect warranty. A blocked compressed air filter element adds pressure drop that every compressor in the hall pays for in energy.
Specifying consumables correctly is part of engineering the system. We supply what the manufacturer specifies for your machine and your conditions, and tell you why when there is a choice to be made.
Availability and lead time
Availability and lead time depend on the part. When you send your model and serial number, we confirm availability and lead time before you commit, so you can plan the service or arrange temporary cover. We do not quote a part we cannot identify.
Older and mixed fleets
Many plants run machines of several brands and ages, some no longer in production. Parts for these can still often be found, but identification takes more care. A nameplate photo, the serial number and, where possible, the old part help us confirm a match. Where a genuine part is no longer available, we tell you what the alternatives are and what each means for performance and reliability, so the decision is yours.
Plan spares, do not chase them
Most urgent parts orders are predictable. A machine’s service intervals are known in advance, and the critical items that stop it, such as drains, sensors and controller parts, are few. A recommended spares list, built for your equipment and the time each part takes to arrive, means the next service never waits for a delivery.
We include a spares list in the handover pack of every system we install and commission. For existing plants, we build one as part of a maintenance contract survey.
The part that stops your line is rarely expensive. It is just not on the shelf.
Supply only, or supply and service
We can supply parts for your own team to fit, or our engineers can carry out the service. Where machines are serviced regularly, a maintenance contract is usually the better route: parts are planned with the schedule, fitted by trained engineers and recorded in one service history.
If a machine keeps needing parts, it may be time to ask a wider question. An air audit shows whether that machine is worth keeping, and plant renovation explains how to upgrade a compressor room without stopping production.