Phnom Penh, serving Cambodia and the region

Products · Ingersoll Rand / Sollant / AirMax / Nexus

Compressor spare parts in Cambodia, planned before the service falls due

For compressor spare parts in Cambodia, Nexus Turnkey supplies genuine Ingersoll Rand and Sollant service kits, air and oil filters, separators and lubricants as an authorised distributor of both brands. We also supply dryer parts and filter elements, condensate drains, sensors and controllers, and spares for HVAC and chiller equipment. Parts are planned against each machine's running hours, so the kit is ready before the service falls due, and identified by model and serial number to get the right part first time.

How to choose

Start from the duty, not the machine

What to send us for a fast, correct quote
Part typeWhat we needWhy
Compressor service kitModel, serial number, running hoursKits and lubricants vary by model and build
Air/oil separator, filters, lubricantModel and serial number, or the part number on the old partConfirms the exact part and lubricant type
Dryer and line filter elementsHousing make, model and sizeElements must match the housing to seal
Drains, sensors, controllersPart number, photo of the nameplateConfirms connection, rating and compatibility
HVAC and chiller sparesUnit model, serial number, the failed partLets us match or confirm an equivalent
Qualitative guidance. Final selection follows a site survey and your demand data.

The right part, before you need it

Many compressor breakdowns trace back to a service that slipped: a separator left too long, a filter that collapsed, the wrong lubricant topped up. The parts are rarely expensive. The downtime is. So we treat spare parts as a plan, not a purchase order raised when something stops.

Nexus Turnkey is an authorised distributor of Ingersoll Rand and Sollant, and technology partner and authorised distributor for AirMax. Our spare parts range covers:

  • Ingersoll Rand and Sollant service parts: service kits, air filters, oil filters, air/oil separators and specified lubricants.
  • Dryer and filter elements: coalescing, particulate and carbon elements, dryer filters and dryer service parts.
  • Drains, sensors and controllers: zero-loss drains and service kits, pressure and temperature sensors, controllers and display modules.
  • HVAC and chiller spares for the Nexus range and common installed equipment.
  • AirMax filters and media for ventilation and air quality systems, covered in filters and media.

How to order the right part first time

The table above shows what we need. The model alone is often not enough. Compressors of the same model can differ by build year, voltage, cooling type or market, and each can change the part. A serial number, or the part number printed on the old part, removes the guesswork. A photo of the nameplate is the fastest way to send it.

For filter elements, the housing matters more than the element. An element that fits but does not seal lets unfiltered air bypass, which is worse than a loaded element. We match elements to the housing make, model and size.

Why genuine parts matter

Genuine parts are made to the compressor maker’s specification for that machine. A separator element that looks the same can differ in media, sealing and pressure drop. A lubricant that looks the same can differ in base oil and additives. Small differences show up later as oil carry-over, higher pressure drop, shorter service intervals or a warranty question nobody wants. As an authorised distributor, we supply Ingersoll Rand and Sollant parts through the authorised channel, so the part fitted matches the part specified. For other equipment, we confirm compatibility by part number before ordering.

What to consider in tropical plants

Heat, humidity and dust shorten consumable life. Intake filters load faster on dusty sites. Lubricants run hotter in hot compressor rooms, and condensate volumes in humid weather are high, so drains work hard. Service intervals published for moderate conditions may need shortening. We set them from your running hours and the conditions we see on site, and adjust them from what we find at each service.

What Nexus supplies and supports

We hold a parts schedule for each machine under a maintenance contract, so kits are ordered before they are due and the service is done in one visit. Parts can also be ordered on their own through our spare parts service. Send us the nameplate photo, running hours and the part you need. We will confirm the right part and come back to you.

FAQ

Questions engineers ask us

Do you supply genuine Ingersoll Rand and Sollant parts?

Yes. As an authorised distributor of both brands, we supply genuine parts through the authorised channel. Send the model and serial number and we confirm the correct part.

Why does the lubricant type matter?

Rotary screw compressors are filled with a lubricant chosen for that machine's design and service interval. Mixing types or using an unsuitable oil can shorten separator and bearing life and may affect warranty. We confirm the specified lubricant from the model and serial number.

Can you supply parts for compressors you did not install?

For Ingersoll Rand and Sollant machines, yes. For other equipment such as dryers, filter housings and drains, send the part number or nameplate and we confirm what we can supply.

How do I avoid waiting for parts when a service is due?

Plan them. We keep a parts schedule against each machine's running hours, so service kits are ordered before they are needed. That is part of every maintenance contract and is available on its own.

Do you supply HVAC and chiller spares?

Yes, for the Nexus range and many common parts for installed HVAC equipment, confirmed by part number before ordering.

Next step

Send us the nameplate

A photo of the nameplate, the running hours and the part you need is usually enough. We will confirm the part and come back to you.

Start typing to search