Phnom Penh, serving Cambodia and the region

AirMaxHEPA filtration, laminar flow units and pass boxes

AirMax cleanroom and positive-pressure equipment

HEPA H13/H14 filtration, laminar flow units and pass boxes for clean areas that must keep contamination out.

Spec summary

At a glance

TypeHEPA filtration, laminar flow units and pass boxes
HEPA classesH13 (≥ 99.95 %) and H14 (≥ 99.995 %) at the most penetrating particle size, per EN 1822-1

Airflows and room classes designed to your requirement. Ask for a datasheet.

Key features

  • HEPA filters in classes H13 and H14
  • Laminar flow units for unidirectional clean air over critical work
  • Pass boxes for transferring materials without opening the room
  • Positive pressure to keep unfiltered air from entering
  • Pre-filtration to extend HEPA life

Applications

  • Pharmaceutical production and filling
  • Hospital and laboratory clean areas
  • Electronics assembly
  • Food packing rooms with hygiene requirements
  • Clean workbenches for sampling and inspection

Keep contamination out, and prove it

A clean area works by controlling three things: the air supplied to it is filtered to a very high standard, air flows in the right direction, and materials and people enter without bringing contamination with them. AirMax supplies the equipment that does this:

  • HEPA filters in classes H13 and H14. Under EN 1822-1, H13 filters retain at least 99.95 % and H14 at least 99.995 % of particles at the most penetrating particle size.
  • Laminar flow units that supply unidirectional HEPA-filtered air over a critical work zone.
  • Pass boxes with interlocked doors for moving materials into a clean area without opening it to the corridor.

Airflows and room classes are designed to your requirement. Ask for a datasheet.

How it works

Supply air from an AHU passes through pre-filters and fine filters, then terminal HEPA filters as it enters the room. The room is kept at positive pressure relative to its surroundings, so air leaks outwards through gaps rather than unfiltered air leaking in. Laminar flow units create a zone of steady, unidirectional clean air over the most critical work. Pass boxes have doors that cannot be opened at the same time, so the clean side is never open to the dirty side.

Clean areas are classified by airborne particle concentration under ISO 14644-1. The class you need depends on your process and your regulator or customer.

Where it fits

  • Pharmaceutical production, filling and packing.
  • Hospital operating theatres, isolation rooms and laboratories.
  • Electronics assembly.
  • Food packing rooms with hygiene requirements.

Our article on clean rooms and positive pressure basics explains the principles.

Selection notes

  • Start from the class. The required ISO 14644-1 class and your process decide air change rates, filter classes and pressure cascades.
  • Protect the HEPA. Good pre-filtration extends HEPA life considerably.
  • Humidity. In Cambodia, clean areas usually need humidity control as well. Cooling and dehumidification are designed together.
  • Test it. HEPA installations are leak-tested after installation and periodically after, and room pressures are monitored.

What Nexus provides

Requirement review, design of filtration, airflow and pressure cascades, supply and installation, commissioning support including filter integrity and pressure checks, and planned filter replacement.

Next step

Request a quote for AirMax cleanroom and positive-pressure equipment

Send your operating data and we will size and propose the right configuration.

Start typing to search