Industries
The air each industry runs on.
Garment mills, food plants, cement works and pharmaceutical sites each depend on different kinds of air. Nexus Turnkey designs compressed air, treatment, humidity, emissions, cooling and monitoring around the standards and risks of your industry.
Industry lens
Every industry breathes differently.
Pick an industry. The cross-section re-draws around the air services that matter in that kind of plant.
Garment & textile
Compressed air for garment & textile plants
A garment plant runs on modest-pressure compressed air spread across hundreds of stations, so leaks and oil carry-over matter more than raw capacity. Fabric and cartons absorb monsoon humidity, lint loads every filter, and production halls run hot. The lens highlights generation and treatment, store dehumidification, lint control, ventilation and one monitoring view.
Air services in focus: Compressed air, Air treatment, Dehumidification, Dust collection, HVAC & chillers, Monitoring (AirSight).
Explore garment & textile- 01Garment & textileCompressed air for a garment factory has to be clean, dry and oil-controlled, because a drop of oil or water on finished fabric becomes a reject. Nexus Turnkey designs the compressor hall, dryers, filtration and ring main around your sewing, pressing and finishing load, then adds dehumidification for fabric and finished-goods stores, lint control and ventilation for the floor. We size the system to your shift pattern so the plant is not paying for air that nobody uses at night.Explore
- 02Food & beverageOil-free air for food and beverage starts with a written purity class, not a compressor brochure. Nexus Turnkey specifies the ISO 8573-1 class each use point needs, then designs generation, drying, filtration and monitoring to meet it and keep meeting it. We add on-site nitrogen for packaging and blanketing, dehumidification for dry stores and packing halls, chilled water for process cooling, and blowers for conveying and effluent aeration, all handed over with records your food safety team can audit.Explore
- 03Cement & building materialsAir systems for cement plants have to keep bag filters pulsing, powder moving and instruments dry in some of the dustiest, hottest conditions in industry. Nexus Turnkey designs the compressed air, blowers and dust collection as one utility: compressors protected from dust and heat, dry air for pulse-jet cleaning and instruments, blowers sized for conveying and silo aeration, and collectors matched to each transfer point. The same approach applies to grinding units, batching plants and tile, brick and gypsum lines.Explore
- 04Pharmaceutical & healthcareClean air for pharmaceutical manufacturing means four things that can each be measured: compressed air to a stated ISO 8573-1 class, cleanroom air to an ISO 14644-1 class, controlled humidity and temperature, and a pressure cascade that keeps contamination moving the right way. Nexus Turnkey designs, installs and supports those utilities for pharmaceutical plants, hospitals and laboratories, and hands over the documentation your quality team needs to qualify them. We work to GMP expectations; we don't certify your facility.Explore
- 05ElectronicsDry air and nitrogen for electronics assembly protect solder joints, moisture-sensitive components and placement accuracy. Nexus Turnkey supplies oil-controlled compressed air dried to a stated dew point, on-site nitrogen at the purity your reflow, wave or selective soldering needs, and rooms held at a steady temperature and humidity. Where assembly or testing needs it, we add clean-zone air handling. Every utility is specified against a class you can measure, and monitored.Explore
- 06Plastics & packagingCompressed air for plastics and packaging plants has to deliver steady pressure to moulding, blowing and packing machines, while chilled water holds mould temperatures and cycle times. Nexus Turnkey designs the compressor hall, treatment, chillers and blowers as one utility, sized to your machines and shifts. We also tackle mould sweating in humid halls, recover compressor heat where there is a use for it, and put energy per part on one screen.Explore
- 07Printing & coatingVOC control for printing and coating plants means capturing solvent-laden air at the press, booth or oven and treating it with the right technology for its volume and concentration: activated carbon, a zeolite rotor concentrator, or a regenerative thermal oxidiser. Nexus Turnkey sizes the extraction and treatment together, then supplies the clean, dry, oil-free compressed air that spray finishes need and the filtration that keeps booths clean. We design to the limit in your environmental permit.Explore
- 08Agro-processingAir systems for rice and feed mills cover three loads: clean, dry compressed air for optical sorters and packing, low-pressure air from blowers for conveying and drying, and dust collection for husk, bran and meal. Nexus Turnkey designs them together for mills that run long seasons in heat and dust. We size the compressors to the sorters' real demand, match blowers to the conveying design, and select cyclones, bag filters and fans for each extraction point, with combustible dust in mind.Explore
- 09ChemicalsAir and emissions systems for chemical plants have to keep instruments working, keep flammable atmospheres inert and keep acid gases, VOCs and odours inside the permit. Nexus Turnkey designs dry, reliable instrument and process air with standby capacity, on-site nitrogen for blanketing and purging, and scrubbers, carbon or thermal treatment for the exhaust. Process cooling and monitoring complete the utility. Equipment in classified areas is selected for the zone your hazardous-area study defines.Explore
- 10Warehousing & logisticsWarehouse humidity control keeps stored goods, packaging and labels in the condition they arrived in through Cambodia's humid seasons. Nexus Turnkey surveys the building, seals the worst moisture paths, then sizes industrial dehumidifiers and ventilation to hold a target relative humidity. We add cooling where products need a temperature limit, ventilation for battery-charging areas, and sensors that log conditions for your customers. The target comes from your products and contracts, not a generic number.Explore
- 11Water & wastewaterAeration blowers for wastewater treatment supply the oxygen that activated-sludge biology needs, and aeration is commonly the largest energy user in such a plant. Nexus Turnkey selects roots, screw or turbo blowers for your oxygen demand and depth, then adds dissolved-oxygen control so airflow follows the load. We also design odour control for inlet works and sludge areas, compressed air for instruments and dewatering, and monitoring for factory effluent plants and municipal works.Explore
Next step
Tell us what you make.
We'll map the air services your process needs and the standards that apply.