Phnom Penh, serving Cambodia and the region

Turnkey industrial air, Phnom Penh

Engineeringthe air industryruns on.

Compressed air, clean air and climate control, designed, supplied, installed and supported by one accountable team.

A compressor hall drawn as an engineering elevationTwo rotary screw compressors feed a refrigerated dryer and inline filters, then a vertical air receiver. A riser lifts the air to a ring main that drops through isolation valves to three points of use.C1C2DR1AR1POU-1POU-2POU-3
Authorised distributorBrands and the Nexus range

Products

Every kind of air, under one roof.

Compressed, treated, dry, clean, cooled, nitrogen and low-pressure air. Nine ranges, selected to work as one system and supported by the same team.

See the full catalogue
  1. Air compressors

    Ingersoll Rand and Sollant rotary screw, PM-VSD and oil-free compressors, selected against a measured demand profile.

    Ingersoll Rand / Sollant
  2. Air treatment & piping

    Dryers, filters, receivers, drains and ring mains, sized to site conditions and the ISO 8573-1 class each user needs.

    Ingersoll Rand / Nexus
  3. Nitrogen generators

    PSA and membrane nitrogen generators from the Nexus range, fed by compressed air treated to the quality they need.

    Nexus
  4. Industrial dehumidifiers

    AirMax portable, ducted, ceiling, pool, desiccant rotor and low-temperature dehumidifiers, sized to your moisture load.

    AirMax
  5. Air quality & emissions

    AirMax activated carbon, zeolite rotor, RTO, scrubbers, dust collection, cleanroom and odour control, matched to the pollutant.

    AirMax
  6. Filters & media

    AirMax filter media, panel and pocket filters, specified by class and replaced on a plan, not when they collapse.

    AirMax
  7. HVAC & chillers

    Air-cooled and water-cooled chillers, AHUs, ventilation fans, cooling towers and evaporative coolers from the Nexus range.

    Nexus
  8. Blowers

    Roots, screw, high-speed turbo and side-channel blowers from the Nexus range for aeration, conveying and process air.

    Nexus
  9. Spare parts

    Genuine Ingersoll Rand and Sollant service parts, dryer and filter elements, drains, sensors, controllers and HVAC spares.

    Ingersoll Rand / Sollant / AirMax / Nexus

Anatomy of an air system

Six packages. One accountable hall.

A compressor room is a system, not a machine. We engineer it package by package, and each package answers a different question.

  1. Package 1 of 6

    Generation

    Oil-injected screw compressors in fixed-speed, VSD or PM-VSD form, oil-free machines where the process demands it, diesel portables and high-pressure packages.

    Design prioritySized to the measured demand profile, with duty and standby defined, delivery verified and package power known.

    Air compressors
  2. Package 2 of 6

    Treatment

    Aftercooling and separation, refrigerated or adsorption dryers, then particulate, coalescing and carbon filtration.

    Design priorityThe pressure dew point and the particle and oil limits your process needs, with capacity corrected to site conditions rather than catalogue ones.

    Air treatment
  3. Package 3 of 6

    Storage & condensate

    Rated receivers with their safety accessories, automatic drains and oil-water separators.

    Design priorityRide through transient demand, hold pressure steady, keep maintenance safe and keep condensate under control.

    Air treatment and condensate
  4. Package 4 of 6

    Distribution

    Ring mains, headers and drops to each machine, with isolation valves, supports and allowance for expansion.

    Design priorityLow pressure loss, the right pipe material, access for maintenance and room to expand in phases.

    Treatment and distribution
  5. Package 5 of 6

    Power & automation

    Panels, protection, cabling, metering, PLCs, sequencing and the interface to SCADA.

    Design prioritySafe integration, coordinated control and data your team can actually use.

    SCADA and monitoring
  6. Package 6 of 6

    Compressor room

    Layout, ventilation and heat ducting, access, drainage and the interfaces to other utilities.

    Design priorityNo hot-air recirculation, and space to maintain, lift and install.

    Compressed air systems
Isometric drawing of a compressor hall: three screw compressors, aftercooler, dryer and filters, an air receiver with drains and an oil-water separator, a ring main leaving the room, a control panel with cable tray, and the room's louvres and hot-air ducts.C1C2C3PTFTATkWPKG 01 · GENERATIONPKG 02 · TREATMENTPKG 03PKG 04 · RING MAINPKG 05PKG 06 · COMPRESSOR ROOM
Fig. 01 · Compressor hall, isometric Airflow

Why Nexus

One team answerable for the air your plant runs on.

Most plants buy air in pieces: a compressor here, a dryer there, piping from someone else. Nobody owns the result. We do.

About Nexus Turnkey
  1. One accountable partner.

    One contract, one team, one commissioning certificate and one after-sales window. When pressure, dew point or energy drifts, you call one number and the answer doesn't depend on whose scope it was.

  2. Every kind of air.

    Compressed, treated, dry, clean, cooled, nitrogen and low-pressure air under one roof, so the systems are designed to work together, not merely sit in the same building.

  3. The lowest lifetime cost of air.

    Energy is a primary design variable, not an option at the end of the quotation. We size, sequence and set pressure for the kWh you will pay for over a machine's life.

  4. Global brands, local ownership.

    Ingersoll Rand, Sollant and AirMax equipment, backed by a local team that owns the project, holds the parts and answers for performance.

  5. We upgrade live plants.

    Staged renovation with temporary air, weekend cut-overs and phased ring-main replacement, so production keeps running while the hall is rebuilt around it.

  6. Visible, measurable, controllable.

    Nexus AirSight puts compressors, dryers and air quality on one screen with one energy number for the hall, without taking protection away from the machines.

The turnkey chain

From first measurement to the hundredth service visit, on one line.

  1. 01

    Demand definition

    Survey, demand profile, pressure and air-quality class.

  2. 02

    Technology selection

    Compare options on lifecycle cost and N+1 resilience.

  3. 03

    Detailed engineering

    P&IDs, sizing, isometrics, electrical and control philosophy.

  4. 04

    Supply

    Generation, treatment and storage from the brands specified.

  5. 05

    Installation

    Mechanical, piping and electrical works with inspection records.

  6. 06

    Integration

    Tie-in to existing utilities, controllers and sequencing.

  7. 07

    SCADA & commissioning

    Logic and alarm tests, staged start-up, SAT and air-quality checks.

  8. 08

    Training & lifecycle

    Operator training, as-builts, spares, maintenance and data reviews.

See the six delivery stages and what you approve at each

Energy

Air that pays for itself in kWh

Compressed air is often one of a factory's most expensive utilities. Part of the waste hides in plain sight: machines running unloaded, drawing power while they make no air.

Illustrative, not measured data.

Illustrative power-versus-time chart: fixed-speed load/unload compared with a VSD following demandNot measured data. A fixed-speed compressor alternates between full-load power and a lower unloaded power. While it is unloaded it still draws power but delivers no air; that energy is shaded. A variable-speed compressor's power instead rises and falls with the demand curve, so the unloaded energy disappears.
Fixed speed (load / unload)Variable speed (VSD)Air demandUnloaded running: energy with no air

Six levers, pulled where the data says they pay

  • We log demand before we select machines, then split the load between base, mid and peak duty. Receivers and pipe sizes are calculated, not guessed, so no machine spends its life running part-loaded.

    Start with an air audit
  • A variable-speed compressor matches its output to demand instead of cycling between load and unload. It earns its place on trim duty. A fixed-speed machine that runs fully loaded on a steady base load is already working efficiently.

    Fixed speed vs VSD vs PM-VSD
  • A sequencer decides which machine runs and when, holds one pressure band for the whole hall and keeps spare machines off instead of idling unloaded.

    SCADA and monitoring
  • Higher generation pressure costs more energy. We find the restrictions first (dryer and filter pressure drop, undersized pipe, choked drops) and fix them before anyone raises the set-point.

    Pressure reduction tool
  • Ultrasonic surveys locate leaks while the plant runs. We tag and repair them, isolate idle zones and correct poor joints, then survey again so the gain holds.

    Leak detection
  • Almost all the electrical energy a compressor uses ends up as heat in its cooling air or oil. Ducted air or a heat exchanger can turn it into process or domestic hot water instead of venting it outside.

    Compressor heat recovery

Savings are project-specific. We measure them against a baseline and verify them after implementation; we don't promise a blanket percentage.

Measure your baseline

Nexus AirSight

See the whole hall. Run it as one.

Explore Nexus AirSight
AirSight · Hall 01 overview

Sample data · not from a live plant

Seeded simulation · 08:05:00Values change with the sample, not with any real plant

Sample picture, fixed-speed control without coordination: C1 runs loaded, C2 cycles between load and unload, and C3 idles unloaded, drawing power while making no air. Header pressure swings across a wide band of about 6.5 to 7.3 bar. Specific energy is about 0.14 kWh per normal cubic metre. Sample data, not from a live plant.

Industries

One factory, re-drawn for each industry's air.

All eleven industries
Factory cross-section highlighting the air services used in Garment & textile: Compressed air, Air treatment, Dehumidification, Dust collection, HVAC & chillers, Monitoring (AirSight). PRODUCTION HALLN₂+
Fig. · Factory cross-section, air services

Garment & textile

Compressed air for garment & textile plants

A garment plant runs on modest-pressure compressed air spread across hundreds of stations, so leaks and oil carry-over matter more than raw capacity. Fabric and cartons absorb monsoon humidity, lint loads every filter, and production halls run hot. The lens highlights generation and treatment, store dehumidification, lint control, ventilation and one monitoring view.

Air services in focus: Compressed air, Air treatment, Dehumidification, Dust collection, HVAC & chillers, Monitoring (AirSight).

Explore garment & textile

Next step

Tell us what your plant runs on.

New hall, tired hall or a group-wide programme: send what you know and an engineer will come back with the questions that matter.

Start typing to search