Phnom Penh, serving Cambodia and the region

Glossary

Zero-loss drain

An automatic condensate drain that senses the liquid level and opens only to discharge water, without venting compressed air.

A zero-loss drain collects condensate in a small reservoir and uses a level sensor or float to open the valve only when liquid is present, closing before air escapes.

The alternatives waste air. Timer drains open on a fixed schedule, so they vent compressed air whenever there is little water and may not clear enough when there is a lot. Valves left cracked open “to be safe” are effectively permanent leaks. Either way, the compressor pays for air that goes straight to the floor drain.

Practical note: fit drains at the aftercooler separator, wet receiver, dryer, filters and low points of the main. Size them for wet-season loads, include a test button and alarm contact, and route discharge to an oil-water separator where oil is present.

Next step

Need this applied to your plant?

We turn definitions into specifications, then into equipment that meets them.

Start typing to search