Move the heat out before it builds up
Production halls collect heat from machines, lighting, people and the sun on the roof. Compressor rooms and plant rooms collect even more. Where full air conditioning is not needed or not practical, ventilation is the most economical way to keep conditions workable: exhaust fans remove hot, stale or fume-laden air, and make-up air replaces it.
The Nexus range includes axial and centrifugal fans for industrial ventilation and exhaust. Capacities are selected to your load. Ask for a datasheet.
How it works
- Axial fans move large volumes of air at low pressure, through walls, roofs or short ducts. They suit general hall ventilation and heat removal.
- Centrifugal fans develop higher pressure and suit ducted systems, filters and process extract where there is more resistance to overcome.
Every exhaust needs a matching supply. If make-up air has no planned route, the building runs at negative pressure, doors become hard to open, and air is drawn in through every gap, often carrying dust or bypassing filters. We design intake openings, louvres and filters with the fans.
Where it fits
- General ventilation of garment, packaging and assembly halls.
- Heat removal from compressor rooms and plant rooms.
- Fume and process extract.
- Warehouses and stores.
Selection notes
- Size from the heat load. Airflow follows from the heat to be removed and the temperature rise you can accept between inlet and outlet air. In a hot climate the outside air is already warm, so ventilation keeps a hall close to outdoor temperature, not below it.
- Air path. Place intakes low and exhausts high where possible, so hot air rises and leaves, and the air sweeps the occupied zone.
- Dust and rain. Intakes need louvres and filters suited to dusty, monsoon conditions.
- Noise and speed control. Variable-speed fans can match airflow to the season and reduce noise and energy.
- Compressor rooms. Duct compressor hot air directly outside so it cannot recirculate.
What Nexus provides
Heat-load and airflow calculation, fan selection, air-path and make-up air design, installation and commissioning with airflow checks, and maintenance including belts, bearings and spare parts.