The right media for each stage of the job
Many filtration systems use media rather than framed filters: rolls or cut pads fitted into grids, frames and booth ceilings. Media is economical to replace and can be cut to fit almost any housing. The type has to suit the job. AirMax supplies:
- Pre-filter media in G2–G4 classes under EN 779, for coarse dust in ventilation and intakes.
- Paint-stop glass fibre media, a progressive-density media that captures paint overspray in spray booth floors and exhaust walls.
- Air-inlet media for louvres and intakes, taking out coarse dust, lint and insects.
- Activated-carbon media for odours and some gaseous contaminants.
- Spray-booth ceiling media, which filters and evens out the supply air falling onto a freshly painted surface.
- Melt-blown media, a fine synthetic media for capturing smaller particles.
Media type, thickness and roll or pad size are selected to your application.
How to choose
Match the media to the contaminant and the stage:
- Paint booths need paint-stop media on the exhaust side to hold overspray and protect the fan and duct, and ceiling media on the supply side so dust does not land on wet paint.
- Intakes need media that holds coarse dust without collapsing in wind or rain.
- Odour needs carbon media with enough contact depth for the airflow.
- Fine particles need a finer media such as melt-blown, usually after a coarse stage.
EN 779 has been superseded by ISO 16890. There is no exact one-to-one conversion, so we advise the ISO 16890 equivalent for each application.
Where it fits
- Spray booths and paint lines.
- Air intakes, louvres and ventilation pre-filtration.
- Odour control in supply or recirculated air.
- Replacement media for existing frames, grids and booth ceilings.
Selection notes
- Paint loading. Overspray loads paint-stop media quickly. Change it on pressure drop or booth airflow, not only on the calendar.
- Humidity. Some media sag or lose structure when wet. Choose media and supports that suit humid conditions and intakes exposed to the monsoon.
- Orientation. Progressive-density media has an air-entering side. Fitted backwards, it loads on its fine face first and blocks early.
- Storage. Keep rolls dry and clean until use.
What Nexus provides
As technology partner and authorised distributor for AirMax, we match media to your application and frames, supply rolls or cut pads on a planned schedule, and can include changes in a maintenance contract.