Hold the humidity target, every hour of the year
In a garment store, a paper warehouse or an electronics room, humidity does its damage slowly: mould on fabric, cartons that soften, corrosion on contacts. Holding the space below the humidity your goods tolerate prevents it. AirMax commercial dehumidifiers are fixed units built for continuous running in exactly these spaces.
Capacities are selected to your load. Ask for a datasheet.
How it works
A fan draws room air over a refrigerated evaporator coil. Moisture condenses below the air’s dew point and drains away through a permanent drain connection. The air is then reheated over the condenser and returned to the room drier. A humidistat or remote sensor switches the unit to hold the target relative humidity. For larger spaces, several units are positioned to cover the floor area evenly.
Where it fits
- Garment, fabric and yarn stores.
- Packaging, carton and paper stores.
- Electronics and component storage.
- Production areas with moderate humidity targets.
Refrigerant units are efficient in warm, humid rooms. For low humidity targets or cold rooms, look at desiccant rotor or low-temperature units.
Selection notes
- Calculate the load. We estimate moisture from outside air, infiltration, door openings, people and products, against the target you need to hold. Floor area alone is not enough.
- Seal first. Strip curtains, fast doors and sealed roof gaps reduce the load, often more cheaply than extra capacity.
- Distribute the air. One large unit in a corner leaves damp zones elsewhere. Placement, or a ducted design, matters.
- Set the target with your quality team. The right humidity depends on what you store. We help set it and log it.
- Plan for the monsoon. The design case is the wettest weeks of the year, not the average.
What Nexus provides
As technology partner and authorised distributor for AirMax, we survey the space, calculate the moisture load, select and position units, install drains and controls, and verify humidity across the space at handover. After that we maintain the units and supply filters and parts. Our article on dehumidifiers for garment factories and warehouses covers the common cases.