Oil-free aeration that turns down with demand
A turbo blower is a centrifugal machine: an impeller spinning at very high speed accelerates air, and a diffuser converts that speed into pressure. Modern turbo blowers mount the impeller directly on a high-speed motor supported by magnetic or air bearings, so there is no gearbox, no oil and no contact wear in normal running. An integrated variable-speed drive adjusts output to demand.
The Nexus range includes high-speed turbo blowers on magnetic or air bearings. Capacities are selected to your load. Ask for a datasheet.
How it works
Air enters through an inlet filter and is accelerated by the impeller. The diffuser and volute slow it down and raise its pressure. The motor shaft floats on magnetic bearings, held by controlled magnetic fields, or on air bearings, held on a thin film of air once at speed. The drive varies speed to deliver the flow the process needs. Controls protect against surge, the unstable condition a centrifugal machine meets if pressure is too high for the flow.
Where it fits
- Wastewater aeration, where oxygen demand varies through the day and blowers run continuously.
- Large continuous duties where efficiency over many running hours outweighs purchase cost.
- Fermentation and process air.
Selection notes
- Operating envelope. Turbo blowers turn down efficiently within their range but have a surge limit at low flow and high pressure. The duty range, including future load growth, must sit within the envelope. Several smaller units can cover a wide range.
- Control from dissolved oxygen. Aeration control that adjusts air to oxygen demand is where variable output pays off.
- Clean, cool intake air. High-speed machines and their electronics need good intake filtration and cooling. In hot Cambodian blower rooms, ventilation and intake design matter.
- Power quality. Integrated drives and bearing controls need a stable supply and correct protection.
- Compare honestly. For smaller or intermittent duties, a roots or screw blower may be the better choice.
What Nexus provides
Duty and envelope analysis, comparison with other blower types, installation, commissioning with aeration control integration, and planned maintenance including filters, cooling and inspection. Savings are project-specific. We measure them against a baseline and verify them after implementation; we don’t promise a blanket percentage.