Phnom Penh, serving Cambodia and the region

Nexus rangeRegenerative side-channel blower

Side-channel (regenerative) blowers

Compact, oil-free side-channel blowers for small flows at low pressure or vacuum.

Spec summary

At a glance

TypeRegenerative side-channel blower

Capacities selected to your load. Ask for a datasheet.

Key features

  • Regenerative impeller in a side channel
  • Oil-free, with no contact between impeller and housing
  • Works as a pressure blower or a vacuum pump
  • Compact, direct-drive, with few wearing parts
  • Inlet filter and relief valve options

Applications

  • Small-scale aeration in tanks and aquaculture
  • Vacuum hold-down and handling
  • Drying and blow-off on production lines
  • Air knives and agitation
  • Light pneumatic conveying

Small flows, simply

A side-channel blower, also called a regenerative blower, moves air through a channel beside a spinning impeller. Each pass through the impeller blades adds energy, so a single-stage machine reaches useful pressure or vacuum at small flows. With no internal contact and no oil, it is compact, quiet and needs little maintenance.

The Nexus range includes side-channel blowers for pressure and vacuum duties. Capacities are selected to your load. Ask for a datasheet.

How it works

An impeller with many radial blades turns in a housing with an annular side channel. Air entering the channel is flung outwards by the blades, flows into the channel, and returns to the blade roots further round. This regenerative circulation repeats many times on the way from inlet to outlet, building pressure step by step. The same machine produces vacuum at its inlet, so it can serve as a blower or a vacuum pump.

Where it fits

  • Small-scale aeration in tanks, ponds and aquaculture.
  • Vacuum hold-down on printing, cutting and packaging machines.
  • Drying, blow-off and air knives on production lines.
  • Agitation and light pneumatic conveying.

For larger flows or higher pressures, a roots blower or screw blower is usually the better fit.

Selection notes

  • Pressure is limited. Side-channel blowers suit low pressures and moderate vacuum. Check the duty against the performance curve, and fit a relief valve to protect against blocked outlets.
  • Replace compressed air where it is misused. Blow-off and drying with compressed air is expensive. Where a low-pressure blower can do the job, it uses far less energy.
  • Heat. Air leaving a side-channel blower warms up, especially near maximum pressure. Check temperature limits for the process.
  • Filtration. An inlet filter protects the close clearances from dust.

What Nexus provides

Duty selection, installation, and maintenance with filters and spare parts. Where blowers replace compressed-air blow-off, we include the change in the compressed air system review.

Next step

Request a quote for Side-channel (regenerative) blowers

Send your operating data and we will size and propose the right configuration.

Start typing to search