Phnom Penh, serving Cambodia and the region

AirMaxPacked-bed, venturi and wet scrubbers

AirMax chemical scrubbers: packed bed, venturi and wet

Scrubbers that absorb acid and alkaline gases, capture mists and fumes, and remove odours using a liquid chosen for the pollutant.

Spec summary

At a glance

TypePacked-bed, venturi and wet scrubbers

Capacities selected to your load. Ask for a datasheet.

Key features

  • Packed-bed scrubbers for acid and alkaline gases such as HCl, H2SO4 mist and NH3
  • Venturi scrubbers for dust, mist and fumes
  • Wet scrubbers for odours and chemical gases
  • Recirculation pump, sump, mist eliminator and dosing control
  • Corrosion-resistant construction for the chemistry involved

Applications

  • Acid and alkaline fume extraction in chemical and plating plants
  • Mist and fume capture from process vents
  • Odour control at wastewater, rendering and food plants
  • Pre-treatment ahead of carbon polishing

Wash the pollutant out of the air

A scrubber brings contaminated air into close contact with a liquid that absorbs or captures the pollutant. Choose the right liquid and contact method, and acid gases, alkaline gases, mists, fumes and many odours are removed before the air leaves the stack. AirMax supplies three types:

Capacities are selected to your load. Ask for a datasheet.

How it works

In a packed-bed scrubber, air rises through a tower filled with packing that gives a large wetted surface, while scrubbing liquid flows down over it. Gases dissolve and react with the liquid. An alkaline solution neutralises acid gases; an acidic solution captures ammonia. A mist eliminator at the top stops droplets leaving with the air.

In a venturi scrubber, air is accelerated through a narrow throat where liquid is injected. The high velocity shatters the liquid into fine droplets that capture particles and mist, which are then separated.

Liquid is recirculated from a sump. Dosing control keeps its chemistry right, and a bleed removes spent liquid for treatment.

Where it fits

  • Chemical, plating and pickling processes with acid or alkaline fumes.
  • Process vents with mists and fumes.
  • Odour control at wastewater, rendering and food plants.
  • As a first stage before an activated-carbon polishing step.

Selection notes

  • Know the chemistry. The pollutant decides the scrubbing liquid and the materials of construction. We confirm them from your process data and safety data sheets.
  • Plan the liquor. Spent scrubbing liquid contains what was removed from the air. It must go to suitable wastewater treatment, and your EHS team confirms the discharge requirements that apply.
  • Corrosion. Materials must resist both the pollutant and the scrubbing chemicals.
  • Maintenance. Packing can foul, nozzles block and pumps wear. Access and spares are part of the design.

What Nexus provides

Process and chemistry review, scrubber selection and sizing, ducting, fans, dosing and controls, installation and commissioning, and planned maintenance with chemical dosing checks.

Next step

Request a quote for AirMax chemical scrubbers: packed bed, venturi and wet

Send your operating data and we will size and propose the right configuration.

Start typing to search