Phnom Penh, serving Cambodia and the region

Glossary

COP (coefficient of performance)

The ratio of useful cooling or heating output to electrical power input for a chiller, heat pump or air conditioner, expressed as a dimensionless number.

COP divides output by input in the same units, for example kW of cooling per kW of electricity. A chiller with a COP of 5 delivers 5 kW of cooling for each kilowatt it draws. Higher is better.

It is the cleanest way to compare cooling equipment, but only at stated conditions. COP falls as the condenser gets hotter or the chilled-water set-point gets colder, so a figure measured at a mild rating point will not be achieved on a hot afternoon in the tropics.

Ask which standard and conditions a COP quotes, compare machines at the same conditions, and look at part-load performance, where most equipment spends most of its hours. On site, measure kWh against delivered cooling to track real COP over time; a falling trend is an early sign of fouling, low refrigerant or control problems. See also EER.

Next step

Need this applied to your plant?

We turn definitions into specifications, then into equipment that meets them.

Start typing to search