Phnom Penh, serving Cambodia and the region

Glossary

Cooling tower

A heat rejection unit that cools water by evaporating a small part of it into an airstream, used with water-cooled chillers, compressors and process equipment.

Warm water is spread over fill inside the tower while fans draw air through it. Some of the water evaporates, which cools the rest. Two figures describe performance: the range, which is the difference between inlet and outlet water temperature, and the approach, the difference between outlet water temperature and the ambient wet-bulb temperature.

The wet-bulb temperature sets the limit. A tower can never cool water below it, and in humid tropical weather the wet-bulb is high, so towers must be selected for local design conditions, not a temperate reference.

Evaporation concentrates dissolved solids, so towers need bleed-off, make-up water and a water treatment programme against scale, corrosion and biological growth, including Legionella control. Keep fill and basins clean and check fans and drift eliminators on a schedule.

Next step

Need this applied to your plant?

We turn definitions into specifications, then into equipment that meets them.

Start typing to search