Fine dust captured in a compact footprint
Cement handling, grinding, welding and powder processes all make fine dust. Left in the air, it harms workers, wears equipment and settles on product. A dust collector captures it at the source through an extraction system and filters it out of the air. Cartridge collectors use pleated filter cartridges, which pack a large filter area into a compact housing.
Capacities are selected to your load. Ask for a datasheet.
How it works
Dust-laden air is drawn through hoods and ducts into the collector. It passes through the pleated cartridges from outside to inside, and the dust collects on the outer surface. Clean air leaves through the fan to atmosphere or back into the building, depending on the dust and the design. At intervals, or when the pressure drop rises, short pulses of compressed air blow backwards through each cartridge and knock the dust cake off into a hopper below. Dust is discharged from the hopper into a bin, bag or rotary valve.
Where it fits
- Cement bagging, transfer points and silo vents.
- Grinding, sanding and finishing.
- Welding and cutting fume.
- Powder handling, weighing and mixing.
For high dust loads, sticky or fibrous dusts, or hot gases, a bag filter may suit better. For coarse material, a cyclone upstream reduces the load.
Selection notes
- Capture first. A good collector cannot fix a poor hood. Hood design and duct velocities decide whether dust is captured at all.
- Air-to-cloth ratio. Filter area must suit the dust. Fine, light dusts need more area.
- Combustible dust. Some dusts can explode. We assess the risk and include the protection the application needs, such as venting, isolation and earthing.
- Humidity. In Cambodia’s humid season, hygroscopic dusts such as cement can absorb moisture and blind filters. Dry compressed air for pulse cleaning, insulated housings and suitable filter media help.
- Compressed air. Pulse cleaning uses compressed air. We include it in the plant’s air demand.
What Nexus provides
Survey of dust sources, hood and duct design, collector selection, installation and commissioning with airflow checks, and planned maintenance with replacement cartridges. Our article on dust collection for cement, rice and feed mills explains the choices in more detail.