Phnom Penh, serving Cambodia and the region

Glossary

cfm (cubic feet per minute)

An imperial unit of volumetric flow, widely used for compressor capacity; 1 m³/min equals about 35.31 cfm.

Cubic feet per minute is the flow unit used on many compressor datasheets and in US Department of Energy guidance. One m³/min is about 35.31 cfm, and one cfm is about 1.699 m³/h or 0.472 L/s.

Variants matter. acfm is actual flow at the conditions where it is measured. scfm is flow corrected to “standard” conditions, but the standard differs between organisations. Compressor FAD quoted in cfm is normally at inlet conditions.

Practical note: when comparing quotations, convert everything to one unit and one basis. A figure in scfm against one in acfm, or in cfm against Nm³/h, can hide a real difference in delivered air. Leak and energy rules of thumb in cfm, such as kW per 100 cfm, convert the same way.

Next step

Need this applied to your plant?

We turn definitions into specifications, then into equipment that meets them.

Start typing to search